Leather Protectors (Class 00 & 0)
- Class: 0 (1000 Volts)
- Length: 11″
- Rubber Glove Colours: Black, Yellow, Red
- Colours: Black, Yellow
- Sizes: 8 through 12, including half sizes
- Testing: Glove testing extra. Call for a quote.
- Testing: Included in price. Gloves are tested (ASTM D120) prior to shipping.
- Recommended Testing Intervals: 6 months
Leather Protectors should always be worn over Rubber Insulating Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. All protectors are steamed pressed on curved hand forms to ensure proper fit over Rubber Gloves.
Manufactured from top-grade goatskin these protectors provide excellent protection for rubber insulating gloves at a very economical price. The cuffs are green leather on the palm side and orange vinyl on the back. All protectors are sewn with heavy-duty nylon thread in the inseam construction pattern.
Protectors for Class 00 and 0 gloves are available with nonmetallic buckle and pull strap or elastic wrist.
All Salisbury Leather Protectors meet ASTM F696 standards.
It is the responsibility of the purchaser to specify the overall length of the protector gloves. The Clearance Table shows the minimum distance which shall be allowed between the protector glove cuff and the bead of the rubber glove per ASTM F496 Specifications.
WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use a properly rated insulating glove for the voltage being worked.
Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves.
Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be
removed from the protector before use.
Years in Service
Annual Service Miles
Emergency Calls per year
Mobile Test Trailers
Annual Service Man-hours
Field Service Representatives
- 15,000 sq/ft
- 1.5 acres
Secure Laydown Area
Pieces of Test Equipment